DIN 915 is Hexagon socket set screws with dog point, ISO 4028 modified
ISO 4028 International Standard specifies the characteristics of hexagon socket set screws with dog point and threads from M1,6 up to and including M24 and of product grade A.
If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 898-5, ISO 965-2, ISO 3506-3 and ISO 4759-1.
Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 225, Fasteners — Bolts, screws, studs and nuts — Symbols and designations of dimensions
ISO 261, ISO general-purpose metric screw threads — General plan
ISO 898-5, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners not under tensile stresses
ISO 965-2, ISO general purpose metric screw threads — Tolerances— Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
ISO 965-3, ISO general purpose metric screw threads— Tolerances— Part 3: Deviations for constructional screw threads
ISO 3269, Fasteners — Acceptance inspection
ISO 3506-3, Mechanical properties of corrosion-resistant stainless-steel fasteners— Part 3: Set screws and similar fasteners not under tensile stress
ISO 4042, Fasteners — Electroplated coatings
ISO 4759-1, Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
ISO 6157-1, Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
ISO 8839, Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals
ISO 8992, Fasteners — General requirements for bolts, screws, studs and nuts
ISO 10683, Fasteners — Non-electrolytically applied zinc flake coatings
ISO 23429, Gauging of hexagon sockets
