ISO 1436 standard is for Rubber hoses and hose assemblies ,Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification.
This ISO 1436 specifies requirements for six types of wire-braid-reinforced hose and hose assembly of nominal size from 5 to 51 plus, for one of the five types (type R2ATS), nominal size 63.
They are suitable for use with:
Oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C;
Water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from 0 °C to +60 °C;
Water at temperatures ranging from 0 °C to +60 °C.
This document does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies
ISO 1436 standard Classification
Six types of hose are specified, distinguished by their construction, working pressure and oil resistance.
Type 1ST: hoses with a single braid of wire reinforcement and having a thick cover.
Type 2ST: hoses with two braids of wire reinforcement and having a thick cover.
Types 1SN and R1ATS: hoses with a single braid of wire reinforcement and having a thin cover.
Types 2SN and R2ATS: hoses with two braids of wire reinforcement and having a thin cover.
