ISO 8434-1 Performance qualification test General, the tube connectors shall meet or exceed the pressure requirements given in Table 1 when tested in accordance with this clause.
Repeated assembly test
The connectors shall pass a repeated assembly test in accordance with ISO 19879.
Proof test
The connectors shall pass a proof test in accordance with ISO 19879.
Burst pressure test
The connectors shall pass a burst pressure test in accordance with ISO 19879.
Cyclic endurance (impulse) test
The connectors shall pass a cyclic endurance test in accordance with ISO 19879. The cyclic endurance
test with vibration specified in ISO 19879 may be used in place of separate cyclic endurance and vibration tests.
Vibration test
The connectors shall pass a vibration test in accordance with ISO 19879. The cyclic endurance test with vibration specified in ISO 19879 may be used in place of separate cyclic endurance and vibration tests.
Leakage (gas) test
The connectors shall pass a leakage (gas) test in accordance with ISO 19879.
Vacuum test
The connectors shall pass a vacuum test in accordance with ISO 19879.
