ISO 8434 6 and BS 5200 is the same BSPP thread type adapter fittings, same bspp thread dimensions, it is british standard hydraulic fittings and BSP hydraulic fittings.
ISO 8434-6 standard is 60° cone connectors with or without O-ring.
BS 5200:1997 standard is Specification for dimensions of hydraulic connectors and adaptors
ISO 8434-6 and BS 5200 is interchangeable standards.
Differences between ISO 8434-6 and BS 5200 as follows:
ISO 8434-6 is based on British standard BS 5200. The threads for the 60° cone connection are pipe threads conforming to ISO 228-1.
ISO 8434-6 specifies general and dimensional requirements for the design and performance of 60° cone connectors and braze-on nipples with or without O-ring sealing, made of steel for tube outside diameters of 6 mm through 50 mm, inclusive, or hose sizes 5 through 51, inclusive. These connectors are for use in fluid
power and general applications within the limits of pressure and temperature specified in this part of ISO 8434.
They are intended for the connection of tubes and hose fittings to ports in accordance with ISO 6149-1 and ISO 1179-1. See ISO 12151-6 for related hose fitting specification. These connectors provide full-flow connections in hydraulic systems operating to the working pressures
BS 5200:1997 specifies the basic dimensions for Pipe fittings, Straight couplings, Hose connectors, Dimensions, Screwed fittings, Dimensional tolerances, Hydraulic transmission systems, Toroidal sealing rings, Service pressure, Pressure, Designations, Hydraulic equipment, Elbows (pipes), Pressure pipes, Interchangeability, Pipe connections, Bend couplings, Marking, Pipe tees, Nipples (pipes).
Fourteen styles of bsp hydraulic adaptors and five styles of hose fittings are specified. BSPP adapters and hose fittings have female ends for face sealing, and a nipple fittings with a groove for o-ring sealing. A spherical seating is alternative to the female conical seating. All screw threads is according to BS 2779 standard.
Normative standard references as follows:
ISO 48, Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation
ISO 261, ISO general purpose metric screw threads — General plan
ISO 1179-1, Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
ISO 1179-2, Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
ISO 1179-3, Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
ISO 3304, Plain end seamless precision steel tubes — Technical conditions for delivery
ISO 3305, Plain end welded precision steel tubes — Technical conditions for delivery
ISO 3601-3, Fluid power systems — O-rings — Part 3: Quality acceptance criteria
ISO 4759-1, Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
ISO 5598:2008, Fluid power systems and components — Vocabulary
ISO 6149-1, Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
ISO 6149-3, Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 3: Dimensions, design, test methods and requirements for light duty (L series) stud ends
ISO 9227, Corrosion tests in artificial atmospheres — Salt spray tests
ISO 10763, Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures
ISO 19879, Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
