Build your own hydraulic hose assembly, it is hydraulic hose register builder, creates your hose assembly specification quickly and easily.
1 hydraulic hose choose and cut. Measure the length of hose that you need and cut it to size with a hose saw. For critical hose lengths, make sure to account for the cutoff factor when determining final length of hose. After cutting the hose, you should have a clean edge and if not, use a file to clean the ends.
2 hydraulic hose connections selection: selecting a fitting series, consider the working pressure, style, type, orientation, attachment methods and material for its corrosion resistance. We offer types of hydraulic hose fittings as follow:
hydraulic hose repair fittings
agricultural reusable hydraulic fittings
gates reusable hydraulic fittings
3 hose assembly equipment to make your hydraulic hose assembly. Mark insertion depth and push on the hose fittings into the fitting until the mark on the hose is even with the end of the shell; Verify hydraulic hose crimper capabilities and adjust the crimper setting, Use Crimpsource for specific technical specifications; Select the appropriate crimper die set, for certain hoses and fittings so make sure to verify the die set by using the crimper decal; Place the hose in the crimping machine; place the compression ring on the step of adapter bowl; pushes the collar, the collar compresses the die. Do not touch the machine until the collar is firmly at the bottom of the die; Verify the crimp diameter on a flat surface of the crimped shell and verify the crimp diameter referenced on the decal; Clean hose assembly.
Hydraulic hose repair assembling is often found in backhoe, excavator, loader, forklift, tractor etc, high pressure and vibration working environment system, it often connect by hydraulic hose quick release coupling, also called hydraulic hose couplers, hydraulic adapters etc. It is jiayuanfitting product range.
If you don’t find the answer, please send me feedback by email jyray@72338.com
