Products

Adjustable end is male thread stud, it consist of locknut, back-up washer, o-rings and retaining ring. JIC fittings is standard end of 37 deg seat Metal or Metal+o-ring sealing to connect steel pipe,

Definition of JIC Fittings Studs, JIC 37 deg flared tube end or 37 deg flared female swivel end is according to SAE J514 and ISO 8434-2 standards, Stud end is depended on matched port styles such as

JIC Swivel Female end is crimped nut assembly end on the body of connector, it is also according to SAE J514and ISO 8434-2:2005. It is flared tube end or male stud end to Swivel fittings type.

A type of flare fitting machined with a 37-degree flare seating seal defined by the SAE J514 and MIL-DTL-18866 standards under JIC (Joint Industry Council), also be same to the standard of ISO 8434-2

Adjustable end is male thread stud, it consist of locknut, back-up washer, o-rings and retaining ring. ORFS fittings is standard end of O-ring face seal connector to connect steel pipe, adapters or

Definition of ORFS studs connector, ORFS male end or ORFS female swivel end is according to SAE J1453 and ISO 8434-3 standards, Stud end is depended on matched port styles such as Metric ports, BSPP

ORFS Swivel Female end is crimped nut assembly end on the body of connector, it is also according to SAE J1453 and ISO 8434-3:2005. It is ORFS tube end to Swivel fittings type.

ORFS fittings is according to standard of ISO 8434-3/SAE J1453 version 2005 dimension, it is an O-ring face seal type by Nut, sleeve, O-ring and fittings body. Union type require tube end connections

Definition of Metric oil Plugs(ISO 6149-4:2017 version) and Caps are commonly used in high pressure hydraulic system, plug is male metric stud to connect valves, manifold block, oil drain port etc,

A Banjo Fitting is consist of Elbow, Tee or Cross connector, hollow blot, O-rings for blot stud, two sealing methods of port, one is soft sealing ring, another one is metal sealing ring or brass

Adjustable end is male thread stud, it consist of locknut, back-up washer, o-rings and retaining ring. DIN fittings is standard end of 24 deg cone connector and cutting ring fittings to connect steel

24°DKO swivel connector is according to DIN 3861/DIN EN ISO 8434-4 standard, this end including Fitting body, Nut, O-ring and thrust wire (assembly). There are two types of usage, One is 24°welding